NEWS:
- Local configuration via Software;
- Enhancement of packet filters (SSID, Packet type and Prefixes / Suffixes);
- THE BRAVODIGI PLATE CAN OPERATE AS KISS TNC (just record the respective Firmware);
- Improved audio processing quality of received packets (higher% success);
- Possibility of Integration with ESP32 to mount iGate;


Recording the new firmware BravoDIGI v2.1:

1. Open the XLoader, select the Device Duemilanove / Nano (ATmega328), select the Firmware HEX file
of Digipeater (inside the XLoader folder) and finally the COM port of the card in your PC. Click Upload;
2. Make the desired settings and settings on your digipeater through the BravoDIGI Config.exe program;